Try TT Now

Autotrader Grid

Use the Autotrader grid to:

  • Select the contract, customer, and trade parameters you want Autotrader to use
  • Dynamically interact with your previously set trade parameters
  • Monitor market conditions and contract positions
  • Control order submission
  • Interact with your theoretical prices

Tip: For optimal performance, TT recommends you only use up to 15 rows in an Autotrader grid. When populating it with contracts, take into consideration the following:

  • Market timing and conditions
  • Your personal trading strategies
  • Volatility
  • Degree of product updates
  • Your hardware specifications

Sections

The Autotrader grid is divided into the following sections:

SectionImage
Row Identifier Section
Control Section
Position Section
Market Section
Working Section
Scratch Section
Profile Parameters Section
Cover Orders Section
Updates Section
Theo Prices Section
Formula Section
Open and Close Section

Row Identifier Section

Use the Row Identifier section to:

  • Identify the number of the row in Autotrader for purposes of creating formulas that reference that row.
  • View the status of a contract as it trades.
  • Enable a row. When enabled, you can interact with a row's fields and Autotrader can trade the displayed contract normally.
  • Disable a row. When disabled, the row is grayed out, Autotrader does not trade it, and you cannot interact with its fields.
FieldDescription
#

Assigns sequential numbers to your rows.

Status

Uses the following color schema to display the status of each contract as it trades:

  • : Your status is normal. Used in Auto Mode.
  • : Your status is normal. Used in Manual Mode.
  • : Your order needs to be updated. Used in Manual Mode.
  • : There is a problem (e.g., you reached your maximum position, or no market exists). Used in both Manual and Auto modes.
  • :  The throttling settings prevented Autotrader from updating an order that otherwise would have been updated. Possible problems or errors exist. Used in both Manual and Auto modes.

For more information, double-click the Status cell for a description.

Active

Sets whether you can use Autotrader to trade the row's contract.

  • To make the contract tradable, click to select Active.
  • To disable the row, click the Active cell. Once disabled, Autotrader cannot trade the contract and deletes all of its orders in the market. You can continue to interact with the contract's trading parameters.
Contract

Displays the contract assigned to the row.

BrokerDisplays a drop-down menu of available brokers for the contract row in a X_TRADER ASP environment. A broker must be selected in order to trade the contract. The TT Gateway that the broker is connected to is also displayed.
Order GWDisplays the logged in TT Gateways for the exchange contract in the row, or displays either "Desktop" or the specific ASE server that was selected when an Autospreader spread was added to the row. This column is available only in a non-X_TRADER ASP environment.

Note: When more than one Gateway flavor exists for a contract (e.g., CME-A, CME-B, etc.) new orders cannot be submitted until an OrderGW is selected. Status for the row will be red with the status text message: "OrderGW is not selected for the row."

Control Section

Use the Control section to:

  • Select automatic or manual trading.
  • Select the Profile that contains the trading parameters you want Autotrader to use.
  • Select the Account Name under which you want to trade.
  • Monitor the number of transactions that Autotrader has performed.
FieldDescription
RowName

Shows the row names to clarify their use. By default, this field is hidden.  

Note: You can assign the same name to multiple rows.

Manual

Limits the row's contract to manual trading. When you select this option, Autotrader does not automatically quote the contract.

Auto

Sets the row's contract for automatic trading. Autotrader quotes the contract according to the trading parameters you set up on the Profile Setup Page Overview. You select the particular profile in the Profile field.

Profile

Sets the name of the profile you use while trading the contract.

AccountSets the Account Name associated with the trading of this particular contract. The Account that is selected must match the Order GW designated Broker Account that was setup in Customer Defaults. If the Account cannot be applied to the contract on the row, the value of this field defaults to the Account Name you set up in the selected Profile.

TransCount

(not editable)

Displays the number of transactions (deletes, adds, and changes) accumulated while trading the contract for that particular row.

You can monitor the total transactions for your row to help avoid exchange fees attributed when exceeding your maximum.

You can set Autotrader to update orders with a change request (one transaction) versus a Cancel and Replace (two transactions). (See Updates Section)

Note: If you trade the same contract in another X_TRADER module (e.g. MD Trader), its transactions are not included in this field.

Open and Close Section

Use the Open/Close section to identify whether or not you are initiating a position or closing an existing position. The Open/Close column is initially disabled.

Options orders require the open/close designation.

  • If you send in a sell order with an O designation, short sale rules apply and you cannot sell on a downtick.
  • If you send in a sell order with a C designation, you are closing out a long position and your sell order can be filled on a downtick.

To view this column in Autotrader:

  1. Right-click in the grid to display the context menu.
  2. Click Hide/Show Cols to display the Show/Hide dialog box.
  3. Scroll down to the end of the list.
  4. Click Open/Close to display a checkmark in the box.

  1. Click OK.

The grid displays the Open/Close column.

You successfully viewed this column in Autotrader.

Position Section

Use the Position section to monitor your:

  • Net position
  • Open position
  • Reset position
  • Average price
  • LFP
  • Row position

Note: Because the values of these fields depend on your trading activity, you cannot edit these fields.

FieldDescription

NetPos

Displays your current net position. Net position is the sum of all positions for a particular Group ID Number across all contracts.

OpenPos

Displays the position for each contract by account. If multiple rows contain the same contract and Group ID Number, Autotrader displays the same OpenPos for each row.

Note: This column displays all quantities traded since you launched X_TRADER.

ResetPos

Displays the number of contracts you designate as being hedged in any of the following manners:

Hedging a contract reduces the value in that particular row's OpenPos.

By default, ResetPos is hidden.

AvgPrice

Displays the average buy or sell price for the current position. Average prices are displayed as decimals.

LFP

Displays the last fill price of an Autotrader order working in that row.

Example: An Autotrader order with a quantity of 10, working at a price of 105.60, is partially filled with 5 lots. The LFP field displays 105.60. If the order reprices to 105.50 with a quantity of 10 and completely fills at 105.50, the LFP field displays 105.50.

This field lets you incorporate the LFP in one Autotrader strategy into the strategy of another Autotrader row.

RowPos

Displays your open position for orders traded using the Autotrader strategy in that row.

Market Section

Use the Market section to:

  • Monitor current market conditions.
  • Open a Floating Order Entry window for a contract.
  • Calculate Implieds. (See Using Implieds in X_TRADER)
  • Highlight Market Bid and Market Ask columns when your orders are at the top of the book:
  • Market Ask columns: Background default color is yellow; text default color is red.
  • Market Bid columns: Background default color is yellow; text default color is blue.

Note: Because the values of these fields depend upon current market conditions, you cannot edit them.

FieldDescription

mBidQty

Displays the quantity of the current market's best bid.

mBidPrc

Displays the price of the current market's best bid.

mAskPrc

Displays the price of the current market's best ask.

mAskQty

Displays the quantity of the current market's best ask.

LTP

Displays the last traded price of the contract.

LTQ

Displays the last traded quantity of the contract.

Net Change

Displays the difference between the last traded price and the previous trading day's settlement price.

Working Section

 

Use the Working section to:

  • Monitor your current bids and offers for that particular row.
  • Highlight Working Bid and Working Ask columns when your orders are at the top of the book:
  • Working Ask columns: Background default color is white; text default color is red.
  • Working Bid columns: Background default color is white; text default color is blue.

Note: Because these fields only display your working orders, you cannot edit them.

FieldDescription

WBidQty

Displays the quantity of your working bid.

WBidPrc

Displays the price on your working bid.

WAskPrc

Displays the price of your working offer.

WAskQty

Displays the quantity of your working offer.

Scratch Section

Also referred to as the Scratch Pad, the Scratch section displays current bids and asks calculated by Autotrader according to your assigned profile. If you selected Direct Order Entry as your Profile Base Price, the Scratch section displays bid and ask prices and quantities from Excel links or formulas entered directly into it.

Depending on the value of your throttle quoting, theScratch section values might not be submitted to the market. (See Throttle Quoting and Scratch Pad Example to see how it interacts with throttle quoting.)

If you select Market, Single Theo, or Bid/Ask Theo as your Profile Base Price, the Scratch section is read only. You cannot interact with it and it only displays the current bids and asks.

When your contract is assigned to a profile with Direct Order Entry as its Profile Base Price, you can use the Scratch Pad to:

  • during the trading session.
  • . The values in Excel seed the Scratch section.
  • to calculate bid and ask prices and quantities

Note: Each of the three types of trading listed above (Manual, Excel links, and Program) requires a different procedure for configuring the fields listed in the table below.

FieldDescription

SBidQty

Sets the quantity of your scratch bid.

SBidPrc

Sets the price on your scratch bid.

SAskPrc

Sets the price of your scratch offer.

SAskQty

Sets the quantity of your scratch offer.

Profile Parameters Section

Use the Profile Parameters section to display your current profile settings. Autotrader uses the settings in this section to determine how it trades.

In regards to these settings:

  • See the to set them.
  • See Saving a Workspace to save your changes.

Note: Your changes are lost if you delete the row or switch the row's assigned profile.

FieldMatching Parameter in Profile Setup Page

BidOffset

Bid Offset

BidQty

Bid Quantity

BidAllow

Bid Change Allowance

AskOffset

Ask Offset

AskQty

Ask Quantity

AskAllow

Ask Change Allowance

MaxPos

Maximum Position

Cover Orders Section

Use the Cover Order section to:

  • Set and edit your cover order offset.
  • Enable or disable the cover order offset.
FieldDescription

CoverOffset

Offset of the cover order. Sets the number of price units away from the fill price at which Autotrader submits its covering orders:

  • For a filled bid, Autotrader submits the covering order above the fill price with the appropriate offset.
  • For a filled offer, Autotrader submits the covering order below the fill price with the appropriate offset.

Enable

When selected, Autotrader automatically places offset covering orders for that row's contract when you receive a fill on a quote submitted by Autotrader.

Updates Section

Use the Updates section to enable the Update Method feature.

FieldDescription
Update Method

From this section you can change the Update Method set on the Profile Setup Page.

  • Use Cancel/Replace: deletes your quote order and sends a new order to the market.
  • Use Cancel/Replace partial fill quantity: Autotrader deletes your quote order and sends a new order to the market with the remaining quantity of your order instead of the original quantity.

Example: You have an order for a Qty of 20. You get filled on a Qty of 15. Instead of replacing the original Qty 20, a new order is sent with a working Qty of 5.

  • Use Change: Autotrader sends a change request to the exchanges that accept them. Changes are counted as one transaction instead of two.

Theo Prices Section

Use the Theo Prices section to generate:

  • A single theoretical price to use as a base when placing bids and offers.
  • A theoretical bid and ask to use as bases when placing bids and offers.
  • Theoreticals to help you make better informed trades.

Generate your theoretical values in one of two ways:

  • in the Theoretical cells.
  • to a theoretical generator that uses the OLE standard (e.g., Excel).

Note: You cannot use formulas in Order Block to generate Theoretical prices (although you can create a link to a theoretical generator).

After you set up the theoretical fields, you can create a profile that uses theoretical prices as the Profile Base Price for determining your bids and offers.

FieldDescription

TheoSingle

Links to your theoretical price generator.

TheoBid

Links to your theoretical Bid generator.

TheoAsk

Links to your theoretical Ask generator.

Delta

Links to your Delta generator. Autotrader uses this field for option trading.

Gamma

Links to your Gamma generator. Autotrader uses this field for option trading.

ImpVol

Links to your ImpVol generator. Autotrader uses this field for option trading.

Vega

Links to your Vega generator. Autotrader uses this field for option trading.

Theta

Links to your Theta generator. Autotrader uses this field for option trading.

Note: Delta, Gamma, ImpVol, Vega, and Theta are values used in options trading. Autotrader provides columns to display these theoreticals, but does not provide pricing models for their automatic generation. Instead, you must import these values from your theoretical price generator or Excel spreadsheet.

Formula Section

Note: You cannot use formulas in Order Block.

This section houses formulas you want Autotrader to use to generate values for specific trading parameters. Use the Formula section to perform these procedures:

To enter a formula into the Formula section:

  1. Scroll to the far right of the window.
  2. Click the cell in a Formula column for the row in which you want to use a formula.

For the first formula, use the Formula A column; for the second formula, use the Formula B column; etc. If you use more than two formulas, you must show the columns using the Show/Hide dialog box.

  1. Enter the you want to store.
  2. When entering your formula, you can reference specific cells in this row or other rows.
    • If you want to reference a cell from this row, in the appropriate section of the formula, type the name of the formula column that contains the formula(s) you want to reference. (e.g., =fA references the cell in fA for that row)
    • If you want to reference a cell in another row, either use the row number or the RowName in the appropriate section of the formula. Both of these columns are hidden be default, and you must use Show/Hide dialog box to show them.
  3. If you want to use this formula in the future, save your workspace.

You successfully entered a formula into the formula section.

To rename a formula column:

  1. Click the letter in the Formula section that you want to rename.
  2. In the space between the Control Bar and the grid, type the name you want to give to the column.
  3. Press Enter.

You successfully renamed a formula column.