System Admin News & Updates

← Back to System Admin News & Updates

LME: Data Center Failover Testing

September 12

LME will provide a two-hour connectivity test window for LMEselect participants to connect to the backup data center (DC 2) from 10:00 to 12:00 UK time on September 12. Once the test window closes, LME will migrate production services back to the primary data center (DC1). The exchange will provide an additional one-hour connectivity test window from 14:15 to 15:15 UK time to allow all participants to test their connectivity again in readiness for the start of trading on September 14.

No order routing will be allowed during this testing, which is for connectivity only.

X_TRADER® and TT® Platform Impact:
We will perform connectivity testing for both platforms. No customer participation is required.

SGX: New Product Additions

September 14

SGX will launch SGX FTSE Equity Price Return Index futures and SGX USD/SGD futures on September 14.

X_TRADER Platform Impact
To trade these products, apply an updated pMerge file to all SGX Gateways:

  1. Copy the SGX.pmg file to <drive letter>:\tt\config.
  2. Stop GuardServer.
  3. Navigate to <drive letter>:\tt\bin.
  4. Double-click pMerge.exe. The Enter Exchange Name window appears.
  5. Specify the exchange name and flavor and click OK. The Open Guardian product table merge file window appears.
  6. Navigate to <drive letter>:\tt\config and select the SGX.pmg file. pMerge will update the existing Guardian Product Table with the correct values. After pMerge completes its tasks, the pMerge status bar displays Finished.
  7. Close the pMerge status bar.
  8. Start GuardServer.

The above listed steps need to be repeated for each SGX Gateway.

After pMerge runs, verify that the Guardian Product Table contains the following values:

ContractProduct CodePoint Value
SGX FTSE Asia ex Japan Index FuturesFAXJ50
SGX FTSE Emerging Market Asia Index FuturesFEMA100
SGX FTSE Indonesia Index FuturesFID5
SGX FTSE Malaysia Index FuturesFMY50
SGX FTSE Philippines Index FuturesFPH25
SGX FTSE Thailand Index FuturesFTH100
SGX FTSE Vietnam 30 Index FuturesFVN5
SGX USD/SGD (Full-Sized) FuturesSND100000

TT Platform Impact
No action required; products will be available automatically.

HKEX: New Product Additions – Five New MSCI Index Futures

September 28

HKEX is launching five new MSCI Index futures on September 28. Products are listed below.

X_TRADER Platform Impact
Pmerge file will be added in a future update.

ContractProduct CodePoint Value
MSCI Taiwan 25/50 Index FuturesTWP50
MSCI Taiwan 25/50 Net Total Return (USD) Index FuturesTWN10

TT Platform Impact
No action required; products will be available automatically.

*UPDATED* TOCOM: TT Migration to JPX Colo

September

On the weekend of August 28, due to issues encountered during the migration of TT platform infrastructure to the JPX colo data center, components supporting TOCOM were rolled back to their previous configuration. 

We will once again migrate TT platform infrastructure supporting TOCOM to the JPX colo data center later this month, and will share specifics on the move as the date approaches.

HKEX: New Product Additions – MSCI Asia and Emerging Market Index Futures and Options 

August-Q4 2020

HKEX continues to add MSCI Asia and Emerging Market Index futures and options. Remaining products to be launched are listed below. Launch dates will be provided when finalized by the exchange.

X_TRADER Platform Impact
To trade these products, apply an updated pMerge file to all HKEX Gateways:

Copy the HKEX.pmg file to <drive letter>:\tt\config.

  1. Stop GuardServer.
  2. Navigate to <drive letter>:\tt\bin.
  3. Double-click pMerge.exe. The Enter Exchange Name window appears.
  4. Specify the exchange name and flavor and click OK. The Open Guardian product table merge file window appears.
  5. Navigate to <drive letter>:\tt\config and select the HKEX.pmg file. pMerge will update the existing Guardian Product Table with the correct values. After pMerge completes its tasks, the pMerge status bar displays Finished.
  6. Close the pMerge status bar.
  7. Start GuardServer.

The above-listed steps need to be repeated for each HKEX Gateway.

After pMerge runs, verify that the Guardian Product Table contains the following values:

Launch DateContractProduct CodePoint Value
TBDMSCI Singapore Free (SGD) Index FuturesMSG100
TBDMSCI Japan (JPY) Index FuturesMJP2500
TBDMSCI Japan Net Total Return (JPY) Index FuturesMJJ1000
Q4 2020MSCI Taiwan (USD) Index OptionsMTW100

TT Platform Impact
No action required; products will be available automatically.

Additional Resources
Exchange Notice, June 1, 2020

FIA Industry-Wide Testing

October 24

The Futures Industry Association will sponsor its annual industry-wide disaster recovery testing on October 24. We will facilitate customer participation for registered TT platform customers. 

Testing is available on the following exchanges:

  • CFE 
  • CME 
  • Eurex 
  • Euronext
  • ICE 
  • Montréal Exchange
  • Nodal

Customers who plan to use TT platform software to participate in the FIA IWT are expected to contact their Onboarding Manager to register with TT by September 25.

TT Platform Impact
We‘ve implemented the Mock Mode feature to support mock trading on the TT platform. Documentation on the use of Mock Mode, including proper use and limitations, is available here.

Of particular note for the FIA testing:

  • Log in to mock.trade.tt for testing.
  • Any Setup changes needed for a mock session must be made in Production (e.g., changes to IP and/or Port to connect to an exchange DR site). When a user clicks Setup while logged in to mock.trade.tt, they will be directed to the Production Setup database. It’s important to note that any changes made to Setup specifically for a mock session must be manually reverted after testing is complete if you don’t want to keep them in Production.

TT Support
Support during the FIA disaster recovery test will be available as during normal production hours. For assistance during testing, please submit feedback via the TT platform or contact TT Support:

U.S. Toll Free:   +1 877 424 8844
Chicago:           +1 312 476 1002
London:            +44 20 7621 8181
Singapore:        +65 6395 7002
Sydney:            +61 2 8022 1702
Tokyo:              +81 3 4577 8345

Additional Resources
FIA DR Test Website
Mock Mode Documentation

Eurex: T7 9.0 Upgrade

November 23

Eurex will move forward with the T7 9.0 upgrade on November 23. Key dates are:

  • September 14: Simulation start
  • November 23: Production launch

Please note that Eurex Simulation will be unavailable from September 1 to September 14.

Details on Eurex T7 Release 9.0 are now available on the exchange website at https://www.eurexchange.com/exchange-en/technology/t7/release9.

X_TRADER Platform Impact
Access to Eurex Simulation will be unavailable in DDE as of September 1. Details on future availability to be published in the near future.

TT Platform Impact
Access to Eurex Simulation will be unavailable in UAT as of September 1. We will provide additional information on availability once the Eurex Simulation environment becomes available after September 14.

Euronext: Oslo Børs Optiq Migration

November 30

Following Euronext’s acquisition of Oslo Børs in June 2019, Oslo Børs’ trading systems across asset classes will migrate from the Millennium Exchange and SOLA systems to the Euronext Optiq systems. The migration timeline is as follows:

  • April 13: Availability in p-EUA
  • November 14 and 21: Dress rehearsals in Production
  • November 30: Production go-live

The Oslo Børs Migration Guidelines and Guide to New Trading System documents are available in the IT Documentation section of the Euronext Connect customer portal.

X_TRADER Platform Impact
Oslo Børs products will not be supported on the X_TRADER platform.

TT Platform Impact
We will make Oslo Børs available for customer testing in UAT in the near future. 

CME: Mandatory iLink 3 Binary Order Entry Protocol for MSGW and BrokerTec Migration

Q4 2020

CME Group will be launching iLink 3, a new order-entry protocol for trading futures, options and BrokerTec products on CME Globex. All customers connected via Market Segment Gateway (MSGW) will need to migrate to iLink 3 by Q4 2020. iLink 2 and iLink 3 for MSGW will run in parallel until the Q4 2020 date. BrokerTec products will migrate to CME on December 7th and will be available on iLink 3 MSGW only. Customers will need to order a dedicated iLink Session ID to be used for the BrokerTec market segment only. CGW will remain on iLink 2 and will not be impacted.

CME will be holding Saturday Mock Sessions for BrokerTec on the following dates:

  • Saturday, October 3
  • Saturday, October 10
  • Saturday, October 31
  • Saturday, November 7
  • Saturday, November 21
  • Saturday, December 5

We will confirm participation dates in future updates. 

For the iLink 2 to 3 migration, CME Group does not require customers to obtain new iLink sessions. Customers will have the ability to migrate their existing iLink sessions from iLink 2 to 3 within the CME Request Center. For all existing migrated sessions, standard Session Policy Charges will apply. 

X_TRADER Platform Impact
X_TRADER will not support iLink 3.0 for MSGW or BrokerTec products that will migrate to CME in Q4. Customers using iLink 3.0 for MSGW after the hard date, tentatively in November 2020, will need to move their connections to CGW. It is strongly encouraged to migrate to the TT platform prior to the November date. 

TT Platform Impact
We will support both the iLink 3.0 upgrade and the BrokerTec US migration to CME on the TT platform. More details, including UAT and Production availability dates, will be provided in future updates. 

Additional Resources
Globex Notice August 3, 2020

FIA: Execution Source Code Schema Initiative (Tag 1031)

Timeline varies by exchange

Multiple exchanges, in cooperation with the FIA Execution Source Code Schema Initiative, are moving forward with plans to implement FIX tag 1031 (CustOrderHandlingInst) on their APIs.

Exchange-Specific Plans

  • CME: Tag 1031 is supported and is mandatory.
  • ICE: Tag 1031 is supported, but not required. 
  • Eurex: Tag 1031 is supported, but not required. 
  • CurveGlobal/IDEM: Tag 1031 is supported with the SOLA 14 Upgrade on February 3, but is not required.

X_TRADER Platform Impact
For CME, tag 1031 is now available in production. Customers should enter a valid value in the FFT6 field in Customer Defaults and/or FIX Account Defaults. For FIX Order Routing applications, FFT6 maps to tag 16903. If no value is set, a default value of “Y” will be sent. CME Gateway 7.18.49 was released on October 18. 

For ICE, tag 1031 is now available with ICE Gateway 7.18.29. Customers should use FFT6 to send the value to the exchange. The field is optional for ICE.

TT Platform Impact
For CME, tag 1031 is now available for use in Production. Customers should select a valid value in Setup or set Order Tag Defaults. 

For ICE, tag 1031 is now available for use in Production. Customers should select a valid value in Setup or set Order Tag Defaults to send the value to the exchange. Customers can choose not to select any value as this is an optional field for ICE.

For Eurex, support of tag 1031 on the TT platform is now available. Customers should select a valid value in Setup or set Order Tag Defaults to send the value to the exchange. Customers can choose not to select any value as this is an optional field for Eurex. On the X_TRADER platform, tag 1031 is not currently supported.

For CurveGlobal and IDEM, support for tag 1031 was added on February 3 for both exchanges.

Additional Resources
FIA Indirect Clearing Documentation

PRODUCT RELEASES
No new products were released this week.